Envionmental Impacts of Mesoporous Silver-Supported Cobalt Oxide Catalyst Based on Life Cycle Assessment

Xueying Li; Bingyang Bai; Yupeng Fan; Minghui Xie; Qi Qiao

doi:doi:10.11648/j.ijepp.20180604.11

| Peer-Reviewed

Envionmental Impacts of Mesoporous Silver-Supported Cobalt Oxide Catalyst Based on Life Cycle Assessment

Xueying Li, Bingyang Bai, Yupeng Fan, Minghui Xie, Qi Qiao

Published in International Journal of Environmental Protection and Policy (Volume 6, Issue 4)

Received: 6 September 2018 Accepted: 28 September 2018 Published: 27 October 2018

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Life cycle assessment can be used to evaluate the environmental issues involved in the entire product production process (including raw material acquisition, production, transportation, use/maintenance and final disposal). It is an important support tool for screening and developing an efficient, low-cost and environmentally friendly product. In this study, based on the life cycle method, an environmental impact assessment of the resource consumption and pollutant emission data was carried out for the mesoporous K-Ag/Co₃O₄ catalyst life cycle. The results show that the proportion of resource consumption to produce 1 kg of mesoporous K-Ag/Co₃O₄ is 0.132. Environmental impact types mainly contain fossil depletion, climate change, human health and particulate matter formation; The substances produced by mesoporous K-Ag/Co₃O₄ catalyst life cycle have the greatest impact on human health, including carcinogens, resp. inorganics and human toxicity. These substances are mainly gas pollutants, CO₂ emission is the largest, followed by SO₂ and CH₄. Whether it is health impact, environmental impact or resource depletion, electricity consumption is the main factor. Thus, it is necessary to improve the production process and use low-power equipment to reduce the environmental impact of the entire life cycle. The use of mesoporous K-Ag/Co₃O₄ catalyst has purified a large amount of formaldehyde and has a good environmental effect.

Published in	International Journal of Environmental Protection and Policy (Volume 6, Issue 4)
DOI	10.11648/j.ijepp.20180604.11
Page(s)	71-77
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2018. Published by Science Publishing Group

Keywords

Life Cycle Assessment, Environmental Impact Assessment, Mesoporous K-Ag/Co₃O₄, Power, Gas Pollutants

References

[1]	Mishra, S., Weighting method for bi-level linear fractional programming problems. European Journal of Operational Research, 2007. 183(1): pp. 296-302.
[2]	Santos, L. F.d. O. M., L. Osiro, and R. H. P. Lima, A model based on 2-tuple fuzzy linguistic representation and Analytic Hierarchy Process for supplier segmentation using qualitative and quantitative criteria. Expert Systems with Applications, 2017. 79: pp. 53-64.
[3]	Shen, C. H., A comparison of principal components using TPCA and nonstationary principal component analysis on daily air-pollutant concentration series. Physica a-Statistical Mechanics and Its Applications, 2017. 467: pp. 453-464.
[4]	Zhang, W., et al., Fuzzy Comprehensive Evaluation for the Industrial Application Potential of Circulating Fluidized Bed-Flue Gas Desulphurization. Journal of Engineering Thermophysics, 2015. 36(5): pp. 1130-1134.
[5]	Harder, R., et al., Review of Environmental Assessment Case Studies Blending Elements of Risk Assessment and Life Cycle Assessment. Environ Sci Technol, 2015. 49(22): pp. 13083-93.
[6]	Walser, T., et al., Prospective environmental life cycle assessment of nanosilver T-shirts. Environ Sci Technol, 2011. 45(10): pp. 4570-8.
[7]	Hong, J. and X. Xu, Environmental impact assessment of caprolactam production – a case study in China. Journal of Cleaner Production, 2012. 27: pp. 103-108.
[8]	Zhang, Y. and Y. Li, Pollution Situation of VOCs in Ambient Air and Research Progresses of VOCs Treatment Technologies. Environmental Protection of Chemical Industry, 2009. 29(5): pp. 411-415.
[9]	Kaluž, L., et al., CoMo/ZrO₂ Hydrodesulfurization Catalysts Prepared by Chelating Agent Assisted Spreading. Procedia Engineering, 2012. 42: pp. 261-266.
[10]	Liu, X., Y. Q. Han, and H. S. Jia, Pt-Rh-Pd Alloy Group Gauze Catalysts Used for Ammonia Oxidation. Rare Metal Materials and Engineering, 2017. 46(2): pp. 339-343.
[11]	Bai, B. and J. Li, Positive Effects of K⁺ Ions on Three-Dimensional Mesoporous Ag/Co₃O₄ Catalyst for HCHO Oxidation. ACS Catalysis, 2014. 4(8): pp. 2753-2762.
[12]	Nunez, P. and S. Jones, Cradle to gate: life cycle impact of primary aluminium production. International Journal of Life Cycle Assessment, 2016. 21(11): pp. 1594-1604.
[13]	Lee, N., Tae, S., Gong, Y. and Roh, S. Integrated building life-cycle assessment model to support South Korea's green building certification system (G-SEED). Renewable & Sustainable Energy Reviews, 2017. 76: pp. 43-50.
[14]	Kiddee, P., R. Naidu, and M. H. Wong, Electronic waste management approaches: An overview. Waste Management, 2013. 33(5): pp. 1237-1250.
[15]	Van der Velden, N. M., K. Kuusk, and A. R. Koehler, Life cycle assessment and eco-design of smart textiles: The importance of material selection demonstrated through e-textile product redesign. Materials & Design, 2015. 84: pp. 313-324.
[16]	Li, Q., et al., Nanocellulose Life Cycle Assessment. ACS Sustainable Chemistry & Engineering, 2013. 1(8): pp. 919-928.
[17]	Guillet, C., et al., Episodic high CH₄ emission events can damage the potential of soils to act as CH4 sink: evidence from 17 years of CO₂ enrichment in a temperate grassland ecosystem, in Agriculture and Climate Change - Adapting Crops to Increased Uncertainty, D. Edwards and G. Oldroyd, Editors. 2015. pp. 208-209.
[18]	Sharma, M., et al., Role of atmospheric ammonia in the formation of inorganic secondary particulate matter: A study at Kanpur, India. Journal of Atmospheric Chemistry, 2007. 58(1): pp. 1-17.
[19]	Emiroglu, A. O., Investigation of NO_x reduction activity of Rh/ZnO nanowires catalyst. Atmospheric Pollution Research, 2017. 8(1): pp. 149-153.
[20]	Fugiel, A., et al., Environmental impact and damage categories caused by air pollution emissions from mining and quarrying sectors of European countries. Journal of Cleaner Production, 2017. 143: pp. 159-168.
[21]	Audenaert, A., S. H. D. Cleyn, and M. Buyle, LCA of low-energy flats using the Eco-indicator 99 method: Impact of insulation materials. Energy & Buildings, 2012. 47(4): pp. 68-73.
[22]	Feng, C. and X. Q. Ma, The energy consumption and environmental impacts of a color TV set in China. Journal of Cleaner Production, 2009. 17(1): pp. 13-25.
[23]	Zeng-ying, L. and M. A. Xiao-qian, Life Cycle Assessment on Selective Catalytic Reduction Flue-gas Denitrification. Proceedings of the Chinese Society of Electrical Engineering, 2009. 29(17): pp. 63-69.

Cite This Article

Plain Text BibTeX RIS

APA Style

Xueying Li, Bingyang Bai, Yupeng Fan, Minghui Xie, Qi Qiao. (2018). Envionmental Impacts of Mesoporous Silver-Supported Cobalt Oxide Catalyst Based on Life Cycle Assessment. International Journal of Environmental Protection and Policy, 6(4), 71-77. https://doi.org/10.11648/j.ijepp.20180604.11

Copy | Download

ACS Style

Xueying Li; Bingyang Bai; Yupeng Fan; Minghui Xie; Qi Qiao. Envionmental Impacts of Mesoporous Silver-Supported Cobalt Oxide Catalyst Based on Life Cycle Assessment. Int. J. Environ. Prot. Policy 2018, 6(4), 71-77. doi: 10.11648/j.ijepp.20180604.11

Copy | Download

AMA Style

Xueying Li, Bingyang Bai, Yupeng Fan, Minghui Xie, Qi Qiao. Envionmental Impacts of Mesoporous Silver-Supported Cobalt Oxide Catalyst Based on Life Cycle Assessment. Int J Environ Prot Policy. 2018;6(4):71-77. doi: 10.11648/j.ijepp.20180604.11

Copy | Download

@article{10.11648/j.ijepp.20180604.11,
  author = {Xueying Li and Bingyang Bai and Yupeng Fan and Minghui Xie and Qi Qiao},
  title = {Envionmental Impacts of Mesoporous Silver-Supported Cobalt Oxide Catalyst Based on Life Cycle Assessment},
  journal = {International Journal of Environmental Protection and Policy},
  volume = {6},
  number = {4},
  pages = {71-77},
  doi = {10.11648/j.ijepp.20180604.11},
  url = {https://doi.org/10.11648/j.ijepp.20180604.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijepp.20180604.11},
  abstract = {Life cycle assessment can be used to evaluate the environmental issues involved in the entire product production process (including raw material acquisition, production, transportation, use/maintenance and final disposal). It is an important support tool for screening and developing an efficient, low-cost and environmentally friendly product. In this study, based on the life cycle method, an environmental impact assessment of the resource consumption and pollutant emission data was carried out for the mesoporous K-Ag/Co3O4 catalyst life cycle. The results show that the proportion of resource consumption to produce 1 kg of mesoporous K-Ag/Co3O4 is 0.132. Environmental impact types mainly contain fossil depletion, climate change, human health and particulate matter formation; The substances produced by mesoporous K-Ag/Co3O4 catalyst life cycle have the greatest impact on human health, including carcinogens, resp. inorganics and human toxicity. These substances are mainly gas pollutants, CO2 emission is the largest, followed by SO2 and CH4. Whether it is health impact, environmental impact or resource depletion, electricity consumption is the main factor. Thus, it is necessary to improve the production process and use low-power equipment to reduce the environmental impact of the entire life cycle. The use of mesoporous K-Ag/Co3O4 catalyst has purified a large amount of formaldehyde and has a good environmental effect.},
 year = {2018}
}

Copy | Download

TY  - JOUR
T1  - Envionmental Impacts of Mesoporous Silver-Supported Cobalt Oxide Catalyst Based on Life Cycle Assessment
AU  - Xueying Li
AU  - Bingyang Bai
AU  - Yupeng Fan
AU  - Minghui Xie
AU  - Qi Qiao
Y1  - 2018/10/27
PY  - 2018
N1  - https://doi.org/10.11648/j.ijepp.20180604.11
DO  - 10.11648/j.ijepp.20180604.11
T2  - International Journal of Environmental Protection and Policy
JF  - International Journal of Environmental Protection and Policy
JO  - International Journal of Environmental Protection and Policy
SP  - 71
EP  - 77
PB  - Science Publishing Group
SN  - 2330-7536
UR  - https://doi.org/10.11648/j.ijepp.20180604.11
AB  - Life cycle assessment can be used to evaluate the environmental issues involved in the entire product production process (including raw material acquisition, production, transportation, use/maintenance and final disposal). It is an important support tool for screening and developing an efficient, low-cost and environmentally friendly product. In this study, based on the life cycle method, an environmental impact assessment of the resource consumption and pollutant emission data was carried out for the mesoporous K-Ag/Co3O4 catalyst life cycle. The results show that the proportion of resource consumption to produce 1 kg of mesoporous K-Ag/Co3O4 is 0.132. Environmental impact types mainly contain fossil depletion, climate change, human health and particulate matter formation; The substances produced by mesoporous K-Ag/Co3O4 catalyst life cycle have the greatest impact on human health, including carcinogens, resp. inorganics and human toxicity. These substances are mainly gas pollutants, CO2 emission is the largest, followed by SO2 and CH4. Whether it is health impact, environmental impact or resource depletion, electricity consumption is the main factor. Thus, it is necessary to improve the production process and use low-power equipment to reduce the environmental impact of the entire life cycle. The use of mesoporous K-Ag/Co3O4 catalyst has purified a large amount of formaldehyde and has a good environmental effect.
VL  - 6
IS  - 4
ER  -

Copy | Download

Author Information

Xueying Li

Key Laboratory of Eco-Industry of the Ministry of Ecology and Environment, Chinese Research Academy of Environmental Sciences, Beijing, China
Bingyang Bai

Key Laboratory of Eco-Industry of the Ministry of Ecology and Environment, Chinese Research Academy of Environmental Sciences, Beijing, China
Yupeng Fan

Institute of Geographic Sciences and Natural Resources Research, Chinese Academy of Sciences, Beijing, China
Minghui Xie

Key Laboratory of Eco-Industry of the Ministry of Ecology and Environment, Chinese Research Academy of Environmental Sciences, Beijing, China
Qi Qiao

Key Laboratory of Eco-Industry of the Ministry of Ecology and Environment, Chinese Research Academy of Environmental Sciences, Beijing, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Xueying Li, Bingyang Bai, Yupeng Fan, Minghui Xie, Qi Qiao. (2018). Envionmental Impacts of Mesoporous Silver-Supported Cobalt Oxide Catalyst Based on Life Cycle Assessment. International Journal of Environmental Protection and Policy, 6(4), 71-77. https://doi.org/10.11648/j.ijepp.20180604.11

Copy | Download

ACS Style

Xueying Li; Bingyang Bai; Yupeng Fan; Minghui Xie; Qi Qiao. Envionmental Impacts of Mesoporous Silver-Supported Cobalt Oxide Catalyst Based on Life Cycle Assessment. Int. J. Environ. Prot. Policy 2018, 6(4), 71-77. doi: 10.11648/j.ijepp.20180604.11

Copy | Download

AMA Style

Xueying Li, Bingyang Bai, Yupeng Fan, Minghui Xie, Qi Qiao. Envionmental Impacts of Mesoporous Silver-Supported Cobalt Oxide Catalyst Based on Life Cycle Assessment. Int J Environ Prot Policy. 2018;6(4):71-77. doi: 10.11648/j.ijepp.20180604.11

Copy | Download

@article{10.11648/j.ijepp.20180604.11,
  author = {Xueying Li and Bingyang Bai and Yupeng Fan and Minghui Xie and Qi Qiao},
  title = {Envionmental Impacts of Mesoporous Silver-Supported Cobalt Oxide Catalyst Based on Life Cycle Assessment},
  journal = {International Journal of Environmental Protection and Policy},
  volume = {6},
  number = {4},
  pages = {71-77},
  doi = {10.11648/j.ijepp.20180604.11},
  url = {https://doi.org/10.11648/j.ijepp.20180604.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijepp.20180604.11},
  abstract = {Life cycle assessment can be used to evaluate the environmental issues involved in the entire product production process (including raw material acquisition, production, transportation, use/maintenance and final disposal). It is an important support tool for screening and developing an efficient, low-cost and environmentally friendly product. In this study, based on the life cycle method, an environmental impact assessment of the resource consumption and pollutant emission data was carried out for the mesoporous K-Ag/Co3O4 catalyst life cycle. The results show that the proportion of resource consumption to produce 1 kg of mesoporous K-Ag/Co3O4 is 0.132. Environmental impact types mainly contain fossil depletion, climate change, human health and particulate matter formation; The substances produced by mesoporous K-Ag/Co3O4 catalyst life cycle have the greatest impact on human health, including carcinogens, resp. inorganics and human toxicity. These substances are mainly gas pollutants, CO2 emission is the largest, followed by SO2 and CH4. Whether it is health impact, environmental impact or resource depletion, electricity consumption is the main factor. Thus, it is necessary to improve the production process and use low-power equipment to reduce the environmental impact of the entire life cycle. The use of mesoporous K-Ag/Co3O4 catalyst has purified a large amount of formaldehyde and has a good environmental effect.},
 year = {2018}
}

Copy | Download

TY  - JOUR
T1  - Envionmental Impacts of Mesoporous Silver-Supported Cobalt Oxide Catalyst Based on Life Cycle Assessment
AU  - Xueying Li
AU  - Bingyang Bai
AU  - Yupeng Fan
AU  - Minghui Xie
AU  - Qi Qiao
Y1  - 2018/10/27
PY  - 2018
N1  - https://doi.org/10.11648/j.ijepp.20180604.11
DO  - 10.11648/j.ijepp.20180604.11
T2  - International Journal of Environmental Protection and Policy
JF  - International Journal of Environmental Protection and Policy
JO  - International Journal of Environmental Protection and Policy
SP  - 71
EP  - 77
PB  - Science Publishing Group
SN  - 2330-7536
UR  - https://doi.org/10.11648/j.ijepp.20180604.11
AB  - Life cycle assessment can be used to evaluate the environmental issues involved in the entire product production process (including raw material acquisition, production, transportation, use/maintenance and final disposal). It is an important support tool for screening and developing an efficient, low-cost and environmentally friendly product. In this study, based on the life cycle method, an environmental impact assessment of the resource consumption and pollutant emission data was carried out for the mesoporous K-Ag/Co3O4 catalyst life cycle. The results show that the proportion of resource consumption to produce 1 kg of mesoporous K-Ag/Co3O4 is 0.132. Environmental impact types mainly contain fossil depletion, climate change, human health and particulate matter formation; The substances produced by mesoporous K-Ag/Co3O4 catalyst life cycle have the greatest impact on human health, including carcinogens, resp. inorganics and human toxicity. These substances are mainly gas pollutants, CO2 emission is the largest, followed by SO2 and CH4. Whether it is health impact, environmental impact or resource depletion, electricity consumption is the main factor. Thus, it is necessary to improve the production process and use low-power equipment to reduce the environmental impact of the entire life cycle. The use of mesoporous K-Ag/Co3O4 catalyst has purified a large amount of formaldehyde and has a good environmental effect.
VL  - 6
IS  - 4
ER  -

Copy | Download